Our range of Monel fittings can withstand the most severe marine and industrial corrosive environments. These fittings can be easily installed and removed using simple hand tools. We offer Monel fittings in variety of designs to meet the specific application requirements.
We are offering a complete range of Monel Fittings which is available as per the following specifications:
Elbows (15 deg, 30 deg, 45 deg, 90 deg, 180 deg, 1.5D, 3D, 5D, 6D, 8D, etc)
Tees (Equal, Unequal, Reducing)
Cross
Reducers (Concentric, Eccentric)
Flanges (SORF, WNRF, BLRF, THRF, SWRF, LJRF, etc.)
Coupling, Half Coupling, Nipple, Hex, SW elbow, SW tee, etc.
Specialized pipe fittings.
15 NB to 100 NB in 3000 LBS, 6000 LBS, 9000 LBS available with NACE MR 01-75
Monel 400 (UNS No. N04400)
Monel 500 (UNS No. N05500)
CHEMICAL COMPOSITION OF MONEL |
|||||||||||||
Designation/ Comercial designation |
C% | Co% | Cr% | Mo% | Ni% | V% | W% | Ai% | Cu% | Nb/Cb Ta% | Ti% | Fe% | Other% |
Monel 400 | 0.12 | - | - | - | 65.0 | - | - | - | 32.0 | - | - | 1.5 | Mn 1.0 |
Monel 401 | 0.10 | - | - | - | 43.0 | - | - | - | 53.0 | - | - | 0.75 | Si 0.25; Mn 2.25 |
Monel 404 | 0.15 | - | 52.0-57.0 | - | - | 0.05 | rest/bal | - | - | 0.50 | Mn 0.10; Si 0.10;S o.024 | ||
Monel 502 | 0.10 | - | - | - | 63.0-17.0 | - | - | 2.5-3.5 | rest/bal | - | 0.50 | 2.0 | Mn 1.5;Si 0.5; S 0.010 |
Monel K 500 | 0.13 | - | - | - | 64.0 | - | - | 2.8 | 30.0 | - | 0.6 | 1.0 | Mn 0.8 |
Inconel Welded Pipe
Inconel Seamless Pipe
Inconel Welded Tube
Inconel Seamless Tube
Elbow Technical Manuals (PDF)