Bango Alloy Technologies Co., Ltd.

Hastelloy Rods and Bars

Fri, 02 Mar 2012 17:23:01 GMT

We offer a comprehensive range of haselloy round bars, in grades Hastelloy C22 and others.

Hastelloy Plates and Coils

Fri, 02 Mar 2012 17:23:01 GMT

We offer a wide range of hastelloy plates, hastelloy sheets & hastelloy coils that finds application in various industries all over the world.

Hastelloy Tubes

Fri, 02 Mar 2012 17:23:01 GMT

Hastelloy Tubes Standards: ASTM: B622, B619, B622, B626 Hastelloy Tubes Sizes: 6mm OD to 254mm OD in 0.2mm thickness to 20mm thickness Hastelloy Tubes Types: SEAMLESS, ERW, WELDED, FABRICATED

Hastelloy Pipes

Fri, 02 Mar 2012 17:23:01 GMT

Hastelloy Pipes Sizes: ½” NB to 12” NB in Sch 10, Sch STD, Sch 40, Sch 80, Sch XS, Sch 160, Sch XXS Hastelloy Pipes Standards: ASTM: B622, B619, B622, B626 Hastelloy Pipes Types: SEAMLESS, ERW, WELDED, FABRICATED

Hastelloy Pipe Fittings

Fri, 02 Mar 2012 17:23:01 GMT

Hastelloy Pipe Fittings Types:
Bend (Long & Short)
Elbow (180 Deg., 90 Deg. & 45 Deg. or as required)
Tee (Equal & Unequal)
Reducer (Concentric & Eccentric)
CAP, Stub end (Long &Short)
Nipple (Barrel), Coupling

Hastelloy Fasteners

Fri, 02 Mar 2012 17:23:01 GMT

We are internationally well known for manufacturing of best quality Hastelloy fasteners.
Types of Hastelloy Fasteners:
Hastelloy Bolts, Hastelloy nuts, Hastelloy washers, Hastelloy Screws

Hastelloy Flanges

Fri, 02 Mar 2012 17:23:01 GMT

Hastelloy Flanges Standards:
ANSI/ASME B16.5, ANSI B16.47. API, DIN, JIS, BS,
Hastelloy Flanges Sizes: 1/2 inch - 48 inch
Hastelloy Flanges Range:
Weld Neck, Slip On, Blind, Socket Weld, Lap Joint, Spectacles, Ring Joint, Orifice, Long Weld Neck, Deck Flange, etc.

Inconel Rods and Wire

Fri, 02 Mar 2012 17:23:01 GMT

We offer a wide range of the finest quality Inconel Rods and Bars. Available in various length and dimensions, they are commonly used in different commercials and industrial purposes.

Inconel Plates

Fri, 02 Mar 2012 17:23:01 GMT

Inconel Plates Thickness:5 mm To 50 mm
Inconel Plates Size
Width :1000 mm to 1500 mm
Length: 2500 mm to 6000 mm
Types
Sheet, Plates, Flat, Strips, Profile, Blank ,Circle, Ring etc.

Inconel Sheets

Fri, 02 Mar 2012 17:23:01 GMT

Inconel Sheets Thickness:0.5 mm To 5 mm thick
Inconel Sheets Size
Width : 1000 mm, 1250 mm, 1500mm.
Length: 2500 mm to 6000 mm.
Types
Sheet, Plates, Flat, Strips, Profile, Blank ,Circle, Ring etc.

Inconel Coil

Fri, 02 Mar 2012 17:23:01 GMT

Inconel Coil Thickness:0.2mm to 3 mm
Inconel Coi Sizes:500mm to 1500mm
Types
Coil, Strip, Foil, etc.

Inconel Flats

Fri, 02 Mar 2012 17:23:01 GMT

Inconel Flats Thickness:5 mm To 50 mm
Inconel Flats Sizes
Width : 10mm to 250mm
Length: 2 Feet to 8 Feet
Types
Sheet, Plates, Flat, Strips, Profile, Blank ,Circle, Ring etc.

Inconel Welded Pipes

Fri, 02 Mar 2012 17:23:01 GMT

Inconel Welded Pipes Range: 15" NB UP TO 400" NB
Inconel Welded Pipes Class
IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 and XS
Inconel Alloy welded Pipes Form
Round, Square, Rectangular, Hydraulic Etc.

Inconel Seamless Pipes

Fri, 02 Mar 2012 17:23:01 GMT

We offer a wide range of inconel seamless pipes made of qualitative raw material procured from reliable vendors.

Inconel Welded Tubes

Fri, 02 Mar 2012 17:23:01 GMT

Inconel Welded Tubes Range
1 mm OD upt o 254 mm OD in 0.2 TO 20 mm thickness.
Inconel Welded Tubes Form: Round, Square, Rectangular, Coil.
Inconel Welded Tubes Length: Single Random & Cut Length

Inconel Seamless Tubes

Fri, 02 Mar 2012 17:23:01 GMT

We offer a wide range of inconel seamless tubes, which is impeccably designed to meet with various industrial functions.

Monel 400

Fri, 02 Mar 2012 17:23:01 GMT

Monel 400 is an extremely combination property that use for largest amount and most widely corrosion resistance alloy.

Monel k-500

Fri, 02 Mar 2012 17:23:01 GMT

Monel K-500 has approximately twice the tensile strength and triple the yield strength of Monel 400.

Monel Pipes

Fri, 02 Mar 2012 17:23:01 GMT

Monel Pipes Range:
15 NB UP TO 600 NB IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS

Monel Tubes

Fri, 02 Mar 2012 17:23:01 GMT

Monel Tubes Types: Seamless, ERW, Welded in Round, Square
Monel Tubes Range: 6.35 mm OD up to 254 mm OD in 0.6 to 20 mm Thick

Monel Plates and Sheets

Fri, 02 Mar 2012 17:23:01 GMT

Range of Monel Plates: 0.5 mm to 200 mm thick in 1000 mm to 2500 mm width & 2500 mm to 12500 mm Length available with NAMR 01-75

Monel Rod and Bars

Fri, 02 Mar 2012 17:23:01 GMT

Monel Rod Range: 5 mm dia to 500 mm dia in 100 mm to 6000 mm length

Monel Fittings

Fri, 02 Mar 2012 17:23:01 GMT

Monel Fittings Range: 15 NB to 100 NB in 3000 LBS, 6000 LBS, 9000 LBS available with NACE MR 01-75

Monel Flanges

Fri, 02 Mar 2012 17:23:01 GMT

We manufacture and offer various types of Monel flanges that are provided in ANSI, DIN, JIS, BS and ASME standards.

Monel Fasteners

Fri, 02 Mar 2012 17:23:01 GMT

We offer high quality monel fasteners that finda application in assembly of automobiles, heavy-duty machines, generators, marine equipment, pipelines, etc.

Molybdenum material

Fri, 02 Mar 2012 17:23:01 GMT

It has the lowest heating expansion of any commercially used metal and it is widely used in alloys, electrodes and catalysts.

Molybdenum Sheet

Fri, 02 Mar 2012 17:23:01 GMT

1, Appearance: silver white metal luster
2, Purity: Mo≥99.95%
3, Density: not less than 10.1g/cm3
4, Supply state: vacuum anneal
5, Quality standard: GB/T 3876-2007 (molybdenum& molybdenum alloy plate)

Molybdenum Mandrels

Fri, 02 Mar 2012 17:23:01 GMT

Main applications: Used for piercing seamless steel tubes, such as stainless steel, borer steel and high-temperature alloy steel, etc.

Molybdenum Rod

Fri, 02 Mar 2012 17:23:01 GMT

1, Appearance: silver grey metal luster
2, Purity: Mo≥99.95%
3, Density: not less than 10.2g/cm3
4, Supply state: annealing or processing
5, Quality standards: GB/T 17992-1999, GB/T 4188-1984 ，ASTM B387-90

Molybdenum Wire

Fri, 02 Mar 2012 17:23:01 GMT

1, Appearance: silver grey metal luster
2, Purity: Mo≥99.95%
3, Density: not less than 10.1g/cm3
4, Supply state: annealing
5, Quality standard: GB/T 4182-2003 (molybdenum wire)

Molybdenum Boats

Fri, 02 Mar 2012 17:23:01 GMT

1, Appearance: silver grey metal luster
2, Density: not less than 10.1g/cm3
3, Supply state: processing
4, Quality standard: GB/T 3876-2007 (molybdenum& molybdenum alloy plates)

Molybdenum Crucible

Fri, 02 Mar 2012 17:23:01 GMT

1, Appearance: silver grey metal luster
2, Purity: Mo≥99.95%
3, Density: not less than 9.7g/cm3
4, Supply state: sintering or processing
5, Quality standard: GB/T 17992-1999
6, Specification: Φ(30~500)mm*(50~1300)mm

Molybdenum Electrode

Fri, 02 Mar 2012 17:23:01 GMT

Our glass molybdenum electrodes are formed by isostatic pressing, forging to several of types after sintering with medium frequency furnace and then turning, rolling, planning and milling.

Molybdenum Target

Fri, 02 Mar 2012 17:23:01 GMT

1, Appearance: silver white metal luster
2, Purity: Mo≥99.95%
3, Density: not less than 10.1g/cm3
4, Supply state: Surface polishing, CNC machine processing
5, Quality standard: GB/T 3876-2007( molybdenum& molybdenum alloy plate)

Molybdenum Tube

Fri, 02 Mar 2012 17:23:01 GMT

Nickel Sheet

Fri, 02 Mar 2012 17:23:01 GMT

Application: Nickel Sheet 99.97 is used to manufacture stainless steel, high nickel alloy, nickel plating, cast steel, alloy steel, white copper, catalyst, battery etc.

Nickel Rod

Fri, 02 Mar 2012 17:23:01 GMT

Grades: UNS N02200 (N200), UNS N02201 (N201), N4 N6 N5 N7 N8
Dimension: Diameter:5-350mm, Length:100-6000mm

Nickel Strip

Fri, 02 Mar 2012 17:23:01 GMT

Mainly used in manufacturing nickel-cadmium battery, nickel-hydrogen battery, lithium cell, assembled battery, as well as industries of electric tool and special lights.

Nickel Alloy Wire

Fri, 02 Mar 2012 17:23:01 GMT

Temper condition: Annealed / hard
Dimension: Diameter - 0.025 mm to 6.0 mm
Length – straight, in coil, on spool (according to request)
Specification: ASTM B160
Package: spools

Nickel Wire

Fri, 02 Mar 2012 17:23:01 GMT

Temper condition: Annealed / hard
Dimension: Diameter - 0.025 mm to 6.0 mm
Length – straight, in coil, on spool (according to request)
Specification: ASTM B160
Package: spools

Nickel Pipe Fittings

Fri, 02 Mar 2012 17:23:01 GMT

Bango Alloy supply nickel pipe fittings including but not limited to elbow, collar, flange, tee, reducer, stub-end, cap, and so on.

Nickel Tube

Fri, 02 Mar 2012 17:23:01 GMT

Nickel tube, nickel pipe, nickel seamless pipe, nickel seamless tube

Nickel Target

Fri, 02 Mar 2012 17:23:01 GMT

Available grades for nickel target:
Pure nickel
Ni-Cr alloy
Ni-V alloy

Niobium Material

Fri, 02 Mar 2012 17:23:01 GMT

It has a low density in comparison to other refractory metals, and it is corrosion resistant, exhibits superconductivity properties, and forms dielectric oxide layers.

Niobium Rod

Fri, 02 Mar 2012 17:23:01 GMT

Niobium and niobium alloyed pipes, bars and wires own a high melting point, corrosion resistance, good cold processing properties and other superb features. Now it they are more and more widely used in chemical, electronic, lighting source, aerospace and other areas.

Niobium Wire

Fri, 02 Mar 2012 17:23:01 GMT

Alloying niobium with 1% zirconium increases the strength of niobium, and decreases slightly its elongation. The increased strength is very advantageous especially at temperatures above 600 °C

Niobium Tube

Fri, 02 Mar 2012 17:23:01 GMT

Standard: ASTM B 394
Grade: RO4200 (pure Niobium ), RO4210 (Nb1%Zr)
Outer Diameter: 1.0-150mm
Wall thickness: 0.2- 10mm
Purity: ≥99.9% and ≥99.95%

Niobium Sheet

Fri, 02 Mar 2012 17:23:01 GMT

Niobium Sheet Specification:
Thickness: 0.5 mm to 50 mm
Width and length: 1000 x 2000 mm or cut to size

Niobium Foil

Fri, 02 Mar 2012 17:23:02 GMT

Niobium Foil Specification:
Thickness: minimum 0.025 mm (25 μm)
Width and length: 500 mm or cut to size

Niobium Target

Fri, 02 Mar 2012 17:23:02 GMT

Niobium target Size:
circular targets: Diameter 25mm up to 400mm x Thickness 3mm up to 28mm
rectangular targets: Thickness 1mm up to 12.7mm x Width up to 600mm x Length up to 2000mm

Titanium Material

Fri, 02 Mar 2012 17:23:02 GMT

Pure titanium and its alloys are widely used in aerospace, military, petrochemical, marine, biomaterial, automobile, prosthetics, and sporting equipment.

Titanium Plates

Fri, 02 Mar 2012 17:23:02 GMT

Industry - ASTM B265 (for unalloyed and alloyed titanium plate, sheet, strip)
Medical - ASTM F67, ASTM F136, ISO 5832
Aerospace - AMS 4911 (for Ti-6Al-4V titanium plate and sheet)

Titanium Rod

Fri, 02 Mar 2012 17:23:02 GMT

Diameter - 3.0 mm to 250 mm (tolerance h7 to h13)
Length - 1000 mm to 6000 mm, or cut to size
Titanium flat bar, square bar, rectangle bar, hexagonal bar available by requirement.

Titanium Coil

Fri, 02 Mar 2012 17:23:02 GMT

Titanium coil grades:
Commercially pure (Grade 1, Grade 2, Grade 3, Grade 4)
Ti-6Al-4V (Grade 5)
Ti-6Al-4V ELI (Grade 23)
Other grade and alloy by request

Titanium Arc Strip

Fri, 02 Mar 2012 17:23:02 GMT

Available grades:
Commercially pure (Grade 1, Grade 2, Grade 3, Grade 4)
Other grade and alloy by request
Titanium arc strip Dimension:
As per our existing mould or customer’s given drawing
Length - 1000 mm to 3000 mm per piece or cut to length

Titanium Pipe

Fri, 02 Mar 2012 17:23:02 GMT

Primarily used specification for titanium tube and titanium pipe
ASTM B861 (Titanium and titanium alloy seamless pipe)
ASTM B862 (Titanium and titanium alloy welded pipe)
ASTM B338 (Seamless and welded titanium & titanium alloy tubes for condensers and heat exchangers)

Titanium Disc

Fri, 02 Mar 2012 17:23:02 GMT

Primarily used Specification for Titanium disc
ASTM B381 (open die, for titanium and titanium alloy forgings)
AMS 4920 (for Ti-6Al-4V, Alpha Beta or Beta Processed – Annealed)

Titanium Wire

Fri, 02 Mar 2012 17:23:02 GMT

Primarily used Specification for titanium wire
Welding: AWS A5.16
Industry: ASTM B348, ASTM B863
Medical: ASTM F67, ASTM F136
Aerospace: AMS 4951, 4954

Titanium Target

Fri, 02 Mar 2012 17:23:02 GMT

Available grades for titanium target: Commercially pure (Grade 1, Grade 2) Ti-6Al-4V (Grade 5) Ti-Al alloy, Ti-Cr alloy, Ti-Ni alloy, Ti-Si alloy, Ti-Zr alloy,Other grade and alloy by request

Titanium Fastener

Fri, 02 Mar 2012 17:23:02 GMT

Primarily used specification for Titanium fastener:
DIN (931, 933, 934, 125, etc.)
ISO (4014, 4017, 4032, 4035, etc.)
ASME (B18.2.1, B18.2.2, B18.2.3, etc)

Nickel Material

Fri, 02 Mar 2012 17:23:02 GMT

Nickel is used in many industrial and consumer products, including stainless steel, magnets, coinage, rechargeable batteries, electric guitar strings and special alloys.

Tungsten Material

Fri, 02 Mar 2012 17:23:02 GMT

The pure tungsten is used mainly in electrical applications, but its many compounds and alloys are used in many applications, most notably in light bulb filaments, radiation shielding (as both the filament and target), and superalloys.

Tungsten Wire

Fri, 02 Mar 2012 17:23:02 GMT

1, Diameter: 0.01mm~2.00mm
2, Grade: W1, W2, WAL1, WAL2, WAL3
3, Density: Purity 99.92%, 99.98% can also be achieved if special demanded.
4, Quality standard: GB/T 4181-1997(tungsten wire)ASTM B760-86
5, Specific electrical: 0.055 Ohm x mm2/m resistance at 20 °C.
6, Modulus of elasticity: 410 kN/mm2, at 20 °C.

Tungsten Rod

Fri, 02 Mar 2012 17:23:02 GMT

1, Name: Tungsten rods
2, Appearance: silver grey metal luster
3, Purity: W≥99.95%
4, Density: not less than 18.3g/cm3
5, Supply state: annealing or processing
6, Quality standard: GB/T 4187-1984 (tungsten rod)ASTM F288-90

Tungsten Electrode

Fri, 02 Mar 2012 17:23:02 GMT

1, Diameters: 1.0mm-10.0mm
2, Length: 150mm, 175mm
3, We also accept orders of special specification Tungsten electrode.

Tungsten Sheet

Fri, 02 Mar 2012 17:23:02 GMT

1, Grade: W1, W2, W3, W4
2, Width*Length: (2.0-500.0mm)*(2.0-500.0mm)
3, Thickness: 0.2mm-15.0mm
4, Density: Purity 99.92%, 99.98% can also be achieved if special demanded.
5, Surface: Sintering surface, Forged surface, Ground surface

Tungsten Boats

Fri, 02 Mar 2012 17:23:02 GMT

1, Appearance: silver grey metal luster
2, Density: not less than 19.1g/cm3
3, Supply state: processing
4, Quality standard: according to customer

Tungsten Crucible

Fri, 02 Mar 2012 17:23:02 GMT

1. Appearance: silver grey metal luster
2. Purity: W≥99.95%
3. Density: not less than 18.3g/cm3
4. Supply state: sintering or processing
5. Quality standard: according to customer

Tungsten Tube

Fri, 02 Mar 2012 17:23:02 GMT

Application: Mainly used for high temperature furnace components, crucible, missile rockets nozzle high temperature furnace, etc.

Tungsten Target

Fri, 02 Mar 2012 17:23:02 GMT

1, Appearance: Silver white metal luster
2, Purity: W≥99.95%
3, Density: not less than 19.1g/cm3
4, Supply state: Surface polishing, CNC machine processing
5, Quality standards: GB/T 3875-2006 (tungsten plate)

Tungsten Parts

Fri, 02 Mar 2012 17:23:02 GMT

Most of our tungsten fabricated parts and molybdenum fabricated parts are used as ion implantation parts for semiconductor industry and as sputtering targets for the solar industry.

TZM

Fri, 02 Mar 2012 17:23:02 GMT

TZM is available in sheet and rod form in basically the same size range as molybdenum with the exception of thin foil. Rebar is experienced in the fabrication of TZM. Refer to the separate TZM sheet.

Tantalum Material

Fri, 02 Mar 2012 17:23:02 GMT

Tantalum is a grayish silver, dense, ductile, very hard, easily fabricated, and highly corrosion resistant metal. It is part of the refractory metals group and occurs naturally in the mineral tantalite, always together with the chemically similar niobium.

Tantalum Rod

Fri, 02 Mar 2012 17:23:02 GMT

Tantalum-10%tungsten and Tantalum-2.5%tungsten have a higher strength at elevated temperatures, and better corrosion resistance than pure tantalum.

Tantalum Wire

Fri, 02 Mar 2012 17:23:02 GMT

Tantalum wire is commonly used as the lead wires on tantalum capacitors. Tantalum wire was the first material used for filaments in light bulbs.

Tantalum Tube

Fri, 02 Mar 2012 17:23:02 GMT

Tantalum tube can be applied in fluid material tanks along with other glass-lined containers, tantalum thermo few and tantalum thermocouple safeguard sheaths, tantalum thermo well, tantalum emitter, tantalum sleeve, tantalum plasma spray focus on and tantalum tubular sputtering target.

Tantalum Sheet

Fri, 02 Mar 2012 17:23:02 GMT

Tantalum-10% tungsten and Tantalum-2.5%tungsten have a higher strength at elevated temperatures, and better corrosion resistance than pure tantalum.

Tantalum Foil

Fri, 02 Mar 2012 17:23:02 GMT

Thickness: minimum 0.025 mm (25 μm)
Width and length: 500 mm or cut to size
Standard: ASTM B708
UNS R05252 Ta-2.5W
UNS R05255 Ta-10W

Tantalum Target

Fri, 02 Mar 2012 17:23:02 GMT

Standard: ASTM B 708-2001
Dimension: Φ(25-400)mm*(3-28)mm
Material: RO5200, RO5400, RO5252(Ta-2.5W), RO5255(Ta-10W)

Zirconium Material

Fri, 02 Mar 2012 17:23:02 GMT

Zirconium is a lustrous, grayish-white, soft, ductile, and malleable metal which is solid at room temperature, though it becomes hard and brittle at lower purities. Due to its highly resistance to corrosion by alkalis, acids, salt water, and other agents, zirconium is extensively used as an alloying agent

Zirconium Rod

Fri, 02 Mar 2012 17:23:02 GMT

Available grades:br /> Zirconium 702 (pure grade)
Zirconium 704 (Zr - Tin)
Zirconium 705 (Zr - Nb)

Zirconium Wire

Fri, 02 Mar 2012 17:23:02 GMT

Available grades:
Zirconium 702 (pure grade)
Zirconium 704 (Zr - Tin)
Zirconium 705 (Zr - Nb)

Zirconium Tube

Fri, 02 Mar 2012 17:23:02 GMT

Zirconium tube Dimension
OD - 5 ~ 110 mm
WT - 0.8 ~ 10.0 mm
Length - up to 12000 mm or cut to size
Zirconium spiral tube, zirconium capillary tube available by requirement.

Zirconium Pipe Fittings

Fri, 02 Mar 2012 17:23:02 GMT

Bango Alloy supply zirconium pipe fittings including but not limited to zirconium elbow, zirconium collar, zirconium flange, zirconium tee, zirconium reducer, zirconium stub-end, zirconium cap, and so on.

Zirconium sheet

Fri, 02 Mar 2012 17:23:02 GMT

Zirconium sheet specification
0.3-30 (thickness)*1150 (wide)*3000 (long) mm

Zirconium Strip

Fri, 02 Mar 2012 17:23:02 GMT

Zirconium strip Dimension
Thickness - 0.03 mm min.
Width - 50 mm to 610 mm (slitting service available)
Form - single strip, in coil or on spool

Zirconium Target

Fri, 02 Mar 2012 17:23:02 GMT

Available grades:
Zirconium 702 (pure grade)
Zirconium 704 (Zr - Tin)
Zirconium 705 (Zr - Nb)

Titanium

Fri, 02 Mar 2012 17:23:02 GMT

Titanium is employed in metal as an alloying component (Ferro-titanium) to decrease grain size and in stainless metal to decrease C content, and being a deoxidizer.

Titanium is normally alloyed with Al (to refine grain size), V, Cu (to harden), Fe, My, MO, and with other metals. Uses for titanium mill items (titanium foil, titanium tube, titanium bar rod, titanium sheet, titanium plate, titanium bar, titanium wire, titanium forgings, and titanium parts) may be discovered in industrial, recreational, emerging markets and aerospace.

Nickel

Fri, 02 Mar 2012 17:23:02 GMT

Nickel is a versatile, highly corrosion resistant element that will alloy with most metals. Due to its corrosion resistance, nickel is used to maintain product purity in the processing of foods and synthetic fibers. It is highly resistant to various reducing chemicals and is unexcelled in resistance to caustic alkalies. In addition, nickel has good thermal, electrical and magnetostrictive properties. Relatively high thermal conductivity of this metal has lead to its frequent use for heat exchangers.

Bango Alloy supplies Nickel 200/201 in the form of plate, sheet, strip, bar, wire, pipe, tubing, pipe fittings, and flanges.

Tungsten

Fri, 02 Mar 2012 17:23:02 GMT

Tungsten is the most widely used of the refractory metals. In wire form, it is essential for the production of lighting products such as wire filament, and other goods where its high temperature properties are of use. Among its properties are a melting point of 3410° C, a low coefficient of thermal expansion and low vapor pressure at elevated temperatures, along with good electrical and thermal conductivity.

Pure tungsten products are widely used for Furnace parts, Semiconductor Base Plates, Components for Electron Tubes, Emission Cathodes for Electron Beam Evaporation, Cathodes and Anodes for Ion Implantation, Tubes / Boats for Sintering of Capacitors, Targets for X-ray Diagnostics, Crucibles, Heating Elements, X-ray Radiation Shielding, Sputtering Targets and Electrodes.

Molybdenum

Fri, 02 Mar 2012 17:23:02 GMT

Molybdenum products are important in the missile industry, where it is used for high-temperature structural parts, such as nozzles, leading edges of control surfaces, support vanes, struts, reentry cones, heal-radiation shields, heat sinks, turbine wheels, and pumps.

Molybdenum products have also been useful in the nuclear, chemical, glass, and metallizing industries. Service temperatures, for molybdenum alloys in structural applications arc, are limited to a maximum of about 1650'C (3000'F). Pure molybdenum has good resistance to hydrochloric acid and is used for acid service in chemical process industries.

Zirconium

Fri, 02 Mar 2012 17:23:02 GMT

There are 4 kinds of corrosion resistant alloyed zirconium in chemical industry: Zr702, Zz704, Zr705 and Zr706, applying to different chemical medium and condition. These four alloyed zirconium's corrosion resistance is almost the same, but their mechanical properties are a big difference. Zr705's tensile strength is the twice of Zr702.

Usually Zr705 is used in chemical equipments which have higher requirements for intensity. But in sulfuric acid containing FeCl3, Zr702 and Zr704's corrosion resistant properties are better than Zr705 and Zr706. Zr706 has enough strength and high elongation, usually used in making heat exchanger

Niobium

Fri, 02 Mar 2012 17:23:02 GMT

Niobium and alloyed niobium have a high melting point, corrosion resistance, good cold processing properties and other superb features. It has been more and more widely used in chemical, electronic, electric light source, aerospace and other areas.

Like tantalum, niobium can be also used in making vacuum furnaces’ attachments and supports of high temperature in technical ways. Niobium of high purity, NbTi, Nb3Sn and so on. Alloyed niobium is also a good superconductor. The surface of metals will show different colors due to different amount of oxygen. So, niobium is also applied to jewelry manufacturing industry.

Tantalum

Fri, 02 Mar 2012 17:23:02 GMT

Because tantalum and its alloys have a high melting point, corrosion resistance, good cold processing characteristic as well as its other excellent features, which makes it is widely used more and more in chemical, areospace, electron and other industries, also in medical treatment.

Inconel

Fri, 02 Mar 2012 17:23:02 GMT

Our clients can avail from us, a quality approved range of Inconel products like Inconel pipes, tubes, fittings, flanges, sheet, plates, coils, fasteners and round bars.

Inconel is a nickel-chromium alloy that is offered in grades such as Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625) and Inconel 601 (UNS No. N06601).

Monel

Fri, 02 Mar 2012 17:23:02 GMT

Monel is a high nickel alloy that is resistant to corrosion and acids with an added advantage of greater strength. Commonly used in highly corrosive conditions like for some marine uses and industrial uses.

We offer Monel products in various grades and forms like pipes, tubes, coils, sheets, plates, plates, bars, rods, flanges, fasteners and pipe fittings.

Hastelloy

Fri, 02 Mar 2012 17:23:02 GMT

Hastelloy is a super alloy that is effective under high temperature, high stress service in a moderately to highly corrosive and erosion prone conditions where more common and less expensive iron-alloys would fail. Commonly used in nuclear and chemical reactors.

We deal in a comprehensive range of Hastelloy products like pipes, tubes, rods, bars, sheets, plates, fasteners, flanges and pipe fittings.